Belajar Mengkonfigurasi Temperature dan Humidity Sensor

(Studi Kasus Produk Avtech-Room Alert 32E)

Jadi ceritanya dilab kantor belum ada temperature dan humadity sensor berbasis ip maka minggu ini dilakukan POC untuk perangkat tersebut, dipilihlah produk dari Avtech berupa produk seri Room Alert 32 E, berikut penampakannya :

Paket bawaan terdiri dari :
1). Room Alert 32E is AVTECH’s most advanced hardware solution for “IT & Facilities Environment Monitoring, Alerting & Automatic Corrective Action”. It is designed specifically to assist with monitoring computer room temperature, humidity, power, room entry and much more in multiple locations up to 900′ away.

2). Wireless Sensor Hub (Powered), AVTECH’s Powered Wireless Sensor Hub (P-WiSH) is a wireless hub that is used exclusively to transmit sensor data from internal and connected sensors back to the Room Alert 26W IT environment monitoring hardware unit.

3). Digital Temperature & Humidity Sensor, This sensor provides real-time temperature values from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius when used with any Room Alert environment monitoring device. Accuracy is within + / – 0.5 degrees. The humidity range is from 0% to 100% relative humidity (RH). Accuracy is within + / – 3.5%.

4). Antenna – External w/13´ Cable & Magnetic Mount, The Antenna – External w/13´ Cable & Magnetic Mount is designed to give Room Alert 26W users more flexibility when wirelessly monitoring the physical conditions in their computer rooms, data centers or other facilities.

5). Room Entry Sensor, AVTECH’s Room Entry Sensor provides real-time recognition of a door or cabinet being open. Standard use is to mount the wired sensor to the frame of a door. Then, mount the matching actuator opposite of the sensor on the door itself. When the door opens, the two components separate and the sensor trips.

6). International Power Adapter – B (EUR, 5V )

Untuk memudahkan instalasi awal direkomendasikan untuk menginstall paket preinstalasi Device ManageR, setelah terinstal colokkan kabel utp bawaan dengan pc/laptop yang telah di install Device ManageR. Setelah anda bisa terhubung dengan Room alert 32E direkomendasikan agar segera merubah IP Address dari perangkat tersebut, langkah selanjutnya adalah mengkonfigurasi sensor:

isi parameter-parameter sensor mengacu pada manual book, setelah parameter terisi mounting perangkat room alert dan sensor-sensor ditempat tempat yang diinginkan.