Skip to content

Belajar mengkonfigurasi basic RIPng di router cisco

Belajar mengkonfigurasi basic RIPng di router cisco,
topology yang digunakan adalah sebagai berikut:
 
 
 +------+                           +------+                            
 !(cnc2)! :1      11::11:/64      :2!(cnc3)!      
 !  R2  !---------------------------!  R3  !   
 !      ! f1/0                 f1/0 !      !          
 +------+                           +------+                                                                        
   :1!f0/0                            :1!f0/0       
     !                                  !
     !10::10:/64                        !12::12:/64 
     !                                  !
   :2!f0/0                            :2!f0/0                
 +------+                            +------+
 !(cnc1)!                            !(cnc4)!
 !  R1  !                            !  R4  !
 !      !                            !      !
 +------+                            +------+

by:
-https://iwing.wordpress.com
-http://www.ittelkom.ac.id/pinguin

Langkah-langkahnya adalah sebagai berikut :
---------------------------------------------
Di router 1 (cnc1)
---------------------------------------------
cnc1(config)#int f0/0
cnc1(config-if)#ipv6 add 10::10:2/64
cnc1(config-if)#no shut

cnc1(config)#ipv6 unicast-routing
cnc1(config)#ipv6 router rip iwing
cnc1(config-rtr)#exit
cnc1(config)#
cnc1(config)#int f0/0
cnc1(config-if)#ipv6 rip iwing enable
cnc1(config-if)#
---------------------------------------------
Di router 2 (cnc2)
---------------------------------------------
cnc2(config)#int f0/0
cnc2(config-if)#ipv6 add 10::10:1/64
cnc2(config-if)#no shut
cnc2(config-if)#
cnc2(config-if)#int f1/0
cnc2(config-if)#ipv6 add 11::11:1/64
cnc2(config-if)#no shut
cnc2(config-if)#exit

cnc2(config)#ipv6 unicast-routing
cnc2(config)#ipv6 router rip iwing
cnc2(config-rtr)#exit
cnc2(config)#int f0/0
cnc2(config-if)#ipv6 rip iwing enable
cnc2(config-if)#int f1/0
cnc2(config-if)#ipv6 rip iwing enable
cnc2(config-if)#
---------------------------------------------
Di router 3 (cnc3)
---------------------------------------------
cnc3(config)#int f1/0
cnc3(config-if)#ipv6 add 11::11:2/64
cnc3(config-if)#no shut
cnc3(config-if)#int f0/0
cnc3(config-if)#ipv6 add 12::12:1/64
cnc3(config-if)#no shut

cnc3(config)#ipv6 unicast-routing
cnc3(config)#ipv6 router rip iwing
cnc3(config-rtr)#exit
cnc3(config)#int f0/0
cnc3(config-if)#ipv6 rip iwing enable
cnc3(config-if)#int f1/0
cnc3(config-if)#ipv6 rip iwing enable
---------------------------------------------
Di router 3 (cnc4)
---------------------------------------------
cnc4(config)#int f0/0
cnc4(config-if)#ipv6 add 12::12:2/64
cnc4(config-if)#no shut

cnc4(config)#ipv6 unicast-routing
cnc4(config)#ipv6 router rip iwing
cnc4(config-rtr)#exit
cnc4(config)#
cnc4(config-if)#ipv6 rip iwing enable
cnc4(config-if)#
---------------------------------------------
how to check 1 (sh ipv6 route)
---------------------------------------------
cnc1#sh ipv6 route
IPv6 Routing Table - Default - 5 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
 B - BGP, M - MIPv6, R - RIP, I1 - ISIS L1
 I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary, D - EIGRP
 EX - EIGRP external
 O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
 ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
C   10::/64 [0/0]
 via FastEthernet0/0, directly connected
L   10::10:2/128 [0/0]
 via FastEthernet0/0, receive
R   11::/64 [120/2]
 via FE80::C801:DFF:FEC8:8, FastEthernet0/0
R   12::/64 [120/3]
 via FE80::C801:DFF:FEC8:8, FastEthernet0/0
L   FF00::/8 [0/0]
 via Null0, receive
cnc1#

cnc2#sh ipv6 route
IPv6 Routing Table - Default - 6 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
 B - BGP, M - MIPv6, R - RIP, I1 - ISIS L1
 I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary, D - EIGRP
 EX - EIGRP external
 O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
 ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
C   10::/64 [0/0]
 via FastEthernet0/0, directly connected
L   10::10:1/128 [0/0]
 via FastEthernet0/0, receive
C   11::/64 [0/0]
 via FastEthernet1/0, directly connected
L   11::11:1/128 [0/0]
 via FastEthernet1/0, receive
R   12::/64 [120/2]
 via FE80::C803:2FF:FE2C:1C, FastEthernet1/0
L   FF00::/8 [0/0]
 via Null0, receive
cnc2#

cnc3#sh ipv6 route
IPv6 Routing Table - Default - 6 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
 B - BGP, M - MIPv6, R - RIP, I1 - ISIS L1
 I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary, D - EIGRP
 EX - EIGRP external
 O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
 ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
R   10::/64 [120/2]
 via FE80::C801:DFF:FEC8:1C, FastEthernet1/0
C   11::/64 [0/0]
 via FastEthernet1/0, directly connected
L   11::11:2/128 [0/0]
 via FastEthernet1/0, receive
C   12::/64 [0/0]
 via FastEthernet0/0, directly connected
L   12::12:1/128 [0/0]
 via FastEthernet0/0, receive
L   FF00::/8 [0/0]
 via Null0, receive
cnc3#

cnc4#sh ipv6 route
IPv6 Routing Table - Default - 7 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
 B - BGP, M - MIPv6, R - RIP, I1 - ISIS L1
 I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary, D - EIGRP
 EX - EIGRP external
 O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
 ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
R   10::/64 [120/3]
 via FE80::C803:2FF:FE2C:8, FastEthernet0/0
R   11::/64 [120/2]
 via FE80::C803:2FF:FE2C:8, FastEthernet0/0
C   12::/64 [0/0]
 via FastEthernet0/0, directly connected
L   12::12:2/128 [0/0]
 via FastEthernet0/0, receive
C   14::/64 [0/0]
 via FastEthernet0/1, directly connected
L   14::14:1/128 [0/0]
 via FastEthernet0/1, receive
L   FF00::/8 [0/0]
 via Null0, receive
cnc4#

---------------------------------------------
how to check 3 (ping and treceroute)
---------------------------------------------
cnc1#ping ipv6
Target IPv6 address: 12::12:2
Repeat count [5]: 100
Datagram size [100]:
Timeout in seconds [2]:
Extended commands? [no]:
Type escape sequence to abort.
Sending 100, 100-byte ICMP Echos to 12::12:2, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!.!!...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!...!!!!!!!!!!!!!!!!!!!!!!
Success rate is 93 percent (93/100), round-trip min/avg/max = 124/270/1440 ms
cnc1#tra
cnc1#traceroute 12::12:2

Type escape sequence to abort.
Tracing the route to 12::12:2

 1 10::10:1 148 msec 60 msec 72 msec
 2 11::11:2 192 msec 160 msec 112 msec
 3 12::12:2 280 msec 228 msec 428 msec
cnc1#
---------------------------------------------
how to check 4 (contoh pengecekan yang lain)
---------------------------------------------
cnc2#sh ipv6 rip iwing
RIP process "iwing", port 521, multicast-group FF02::9, pid 188
 Administrative distance is 120. Maximum paths is 16
 Updates every 30 seconds, expire after 180
 Holddown lasts 0 seconds, garbage collect after 120
 Split horizon is on; poison reverse is off
 Default routes are not generated
 Periodic updates 23, trigger updates 2
 Interfaces:
 FastEthernet1/0
 FastEthernet0/0
 Redistribution:
 None

cnc2#sh ipv6 rip database
RIP process "iwing", local RIB
 10::/64, metric 2
 FastEthernet0/0/FE80::C800:DFF:FEC8:8, expires in 165 secs
 11::/64, metric 2
 FastEthernet1/0/FE80::C803:2FF:FE2C:1C, expires in 171 secs
 12::/64, metric 2, installed
 FastEthernet1/0/FE80::C803:2FF:FE2C:1C, expires in 171 secs
cnc2#

cnc2#debug ipv6 rip
 RIP Routing Protocol debugging is on
cnc2#
*Jun 11 03:57:45.519: RIPng: Packet waiting
*Jun 11 03:57:45.519: RIPng: response received from FE80::C803:2FF:FE2C:1C on FastEthernet1/0 for iwing
*Jun 11 03:57:45.523:        src=FE80::C803:2FF:FE2C:1C (FastEthernet1/0)
*Jun 11 03:57:45.527:        dst=FF02::9
*Jun 11 03:57:45.527:        sport=521, dport=521, length=52
*Jun 11 03:57:45.527:        command=2, version=1, mbz=0, #rte=2
*Jun 11 03:57:45.531:        tag=0, metric=1, prefix=12::/64
*Jun 11 03:57:45.531:        tag=0, metric=1, prefix=11::/64
cnc2#
---------------------------------------------

---------------------------------------------
sekian dulu dan semoga bermanfaat...."salam sedogedoi"
---------------------------------------------
ref: Cisco IOS IPv6 Configuration Guide
Release 12.4, url: http://www.cisco.com (mei 2010)










One Comment leave one →
  1. 27 November 2015 11:48 PM

    mas bsa postingkn cara konfigurasi ipv6 gk?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: