Skip to content

Belajar Menggunakan FTP di cisco router

Karena penasan akhirnya memutuskan untuk belajar menggunakan fasilitas
FTP di router cisco.
-----------------------------------------------------------------------
Hal yang perlu dikonfigruasi minimal adalah user dan password
-----------------------------------------------------------------------
cnc1(config)#ip ftp ?
 passive           Connect using passive mode
 password          Specify password for FTP connections
 source-interface  Specify interface for source address in FTP connections
 username          Specify username for FTP connections
-----------------------------------------------------------------------
cnc1(config)#ip ftp username harry
-----------------------------------------------------------------------
cnc1(config)#ip ftp password ?
 <0-7>  Encryption type (0 to disable encryption, 7 for proprietary
 LINE   The password
-----------------------------------------------------------------------
cnc1(config)#ip ftp password iwing123
cnc1(config)#
-----------------------------------------------------------------------
untuk pengecakan pastikan ftp server bisa berkomunikasi dengan router,
dan jangan lupa user dan password yang tadi kita setting harus sama 
dengan user dan password pada ftp server, dan kita atur agar user ter
sebut memiliki kemampuan menulis (write) di ftp server.
-----------------------------------------------------------------------
cnc1#ping 192.168.10.3 repeat 10
Type escape sequence to abort.
Sending 10, 100-byte ICMP Echos to 192.168.10.3, timeout is 2 seconds:
!!!!!!!!!!
Success rate is 100 percent (10/10), round-trip min/avg/max = 4/19/48 ms
cnc1#
-----------------------------------------------------------------------
cnc1#copy running-config ftp
Address or name of remote host []? 192.168.10.3
Destination filename [cnc1-confg]?
Writing cnc1-confg !
1076 bytes copied in 14.088 secs (76 bytes/sec)
cnc1#
-----------------------------------------------------------------------

-----------------------------------------------------------------------
cnc1#copy ftp running-config
Address or name of remote host []? 192.168.10.3
Source filename []? cnc1-confg
Destination filename [running-config]?
Accessing ftp://192.168.10.3/cnc1-confg...
Loading cnc1-confg !
[OK - 1076/4096 bytes]
*Nov  9 20:54:07.835: %SYS-5-CONFIG_I: Configured from 
ftp://harry:*****@192.168.10.3/cnc1-confg by console
cnc1#
---------------------------------------------------------------------
ref:
[1].Cisco IOS Configuration Fundamentals
Configuration Guide Release 12.4T, 
URL:http://www.cisco.com, (November 2010)

No comments yet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: